G5 CSM 720 Settings

Written by Ashley Davis Monday, 04 May 2009 19:12

CSM 720

The following are my CSM 720 settings for the G5. The only other missing pieces of data to succesfully setup the CSM 720 is to understand exactly what servo I'm using, what horn length on the servo and my tx gain settings. So in answer to those questions, these settings are for a Futaba 9257 tail servo. The horn length is based upon using the disc horn that comes with the 9257 utilising one of the outer holes. The tx gain settings I use are on a Spektrum DX7 and are set at 70% for heading hold mode.

---

Add this page to your favorite Social Bookmarking websites